回转升降生物接触工艺的实验研究

提出了一种具有特殊运转方式的新型RBC系统－－回转升降生物接触工艺，对回转升降生物接触工艺的工作原理和工艺特征进行了论述。并通过动态实验，对回转升降生物接触工艺小型实验装置的性能和效果进行了初步考察。     

云南省磷肥工业产品结构的现状及发展建议

分析了国内外磷肥工业产品的市场形势及发展趋势，同时对云南省磷肥产品的发展提出建议。     

生物接触氧化法处理制革综合废水中的常见问题及对策

探讨了生物接触氧化法处理制革综合废水时常见的出水水质波动大 ,硫化物、三价铬、悬浮物浓度高 ,易产生大量泡沫和曝气效果不理想等问题 ,提出了相应的解决措施。经制革厂运用实践证明 :改进后的生物接触氧化法处理制革综合废水是较为理想的方法     

咸味米粥增稠稳定剂的研究

以粘度和悬浮时间这两项指标作为性能评价指标,对常见的几种增稠稳定剂进行复配增效实验的研究评价,筛选出一种高粘度的复合增稠稳定剂,应用于咸味米粥罐头中,有效解决了咸味米粥罐头分层、稳定性能差的难题。     

In-situ composite Cu-Cr contact cables with high strength and high conductivity

In order to develop a new type of contact cable with high strength and high electrical conductivity, Cu-Cr alloy series were selected as materials and Cu-Cr alloy castings were produced by means of directional solidification continuous casting (DSCC) process. The results show that the fibrillar strengthening phase, 13-Cr, orderly arranges among the copper matrix phase along the wire direction; and a microstructure of in-situ composite forms, which retains the basic property of good conductivity of the copper matrix and meanwhile obtains the strengthening effect of [3-Cr phase. The production technology as well as the mechanical property, electrical property, and synthetic property of the in-situ composite contact cables was discussed.     

The effect of a solid additive on rolling fatigue life

Behaviour of a series of lubricant oils and the effect of a non stoichiometric inorganic compound, as solid extreme pressure additive, on rolling fatigue life are studied using the rolling four-ball accelerated service simulation test proposed by Barwell and Scott. The results show, in all tested cases, the remarkable efficacy of this type of additive. The Total Acidity Number (tan) was found to increase with performance time for the case of the base lubricant, while for the oils with additives, it remained at its constant low value. This led to a proposal of a possible mechanism of the additive performance in the rolling process.     

Numerical simulation of typical contact situations of brake friction materials

In the paper, a model typical for contact situations of automotive brakes is established based on the method of movable cellular automata. The processes taking place at local contacts in an automotive brake system are analysed. Based on microscopic and micro-analytical observations, the following contact situations were simulated: (i) a couple of ferritic steel against pearlitic steel, both covered by an oxide layer mixed with graphite nanoparticles and (ii) the same situation but without oxide layers. The results of calculated mean coefficients of friction of the oxide-on-oxide contact correspond well to expected values for a real braking system, whereas steel-on-steel contact are twice as high. This allows one to make some conclusions; for example, oxide formation will take place more quickly than friction layer elimination, and finally this is responsible for the stabilisation of the coefficient of friction.     

Short contact time dissolution of vitrinite and inertinite concentrates

The short contact time dissolution of vitrinite and inertinite concentrates of an Australian bituminous coal was studied under isothermal conditions with tetralin as solvent. The reactivity of the two maceral types and the yields and nature of the products were determined for a range of reaction temperatures (400, 420 and 440 °C) and reaction times (2–20 min). The dissolution of vitrinite proceeded at a significantly greater rate than for inertinite and was associated with greater selectivity to soluble non-gaseous products. At very short reaction times (2 min), the vitrinite underwent solubilizing reactions to yield products of higher molecular weight and greater oxygen functionality than was the case for inertinite, for which changes in the chemical nature of the products were negligible over the range of conditions studied. At longer reaction times (5 min), the composition of the vitrinite-derived products was similar to that of the inertinite-derived products.     

The impacts of a GTL plant on Brazil's oil products supply and refinery expansion

This paper assesses the impacts of a GTL plant on the expansion of Brazil's oil refining segment. The GTL plant (50,000 bpd) was sized to start up operations in 2015, producing diesel and naphtha through the indirect route (FT-synthesis). This plant will consume the non-associated natural gas production from the recent discoveries at the Santos Basin (around 419 Bm³), and the associated gas production from the Campos Basin. Both basins are located in the Southeast of Brazil, the most populated, rich and industrialized region of the country. Two different criteria for refinery expansion were simulated in order to meet oil product demand scenarios. Findings show that depending on the refinery expansion criteria considered GTL will play a fundamental hole to meet the oil product demand forecast to Brazil in the next 10 years.     

浅议糯米酒的研制及系列化

经过对现在普遍采用的糯米酒生产工艺的改进，多次研制试验，最后确定的两种工艺为；（1）清质型工艺流程；（2）乳浊型工艺流程。合理的工艺条件参数为：淋饭温度30－35℃；多曲混合发酵，曲的用量为1％左右；糖化温度30－35℃，2－3d，最终糖度25g/100ml，加浆发酵温度0－5℃，灌装杀菌温度75－80℃，45min。